Focus 61 User Guide User interfaces
29 (118) 9839 0211 01 Edition 2.0
5 WORKING WITH ToolsTalk BLM
ToolsTalk BLM is a PC software package to manage the Focus 61.
It offers user-friendly programming and real time monitoring.
ToolsTalk BLM is a configuration interface between the user and the Focus 61.
The main features that characterize the configuration interface between the user and the Focus 61 are as
follows:
• Stations configuration
• Pset / Job definition
• Events configuration (triggers to start a Job)
• Controller settings (e.g. Radio Channels, Units, etc.)
• Open Protocol settings
• Download tightening results and traces from the internal memory of the Controller
• Installing and Configuring protocols possibilities
NOTE: For further details about software installation and software registration, refer
respectively to the paragraphs Installing the software and Registering the software.
To Next Page
Loading...
