Installation Instructions Focus 61 User Guide
9839 0211 01 Edition 2.0 16 (118)
3 INSTALLATION INSTRUCTIONS
3.1 Installing Focus 61
WARNING: Place the Focus 61 so that the On/Off switch is easily accessible.
NOTE: For maximum tool performance, place the Focus 61 in order to guarantee free airflow.
This improves the cooling of the controller.
1. Place the Focus 61 either on the wall or on steel plate by
using four M5 screws. If the controller is placed on a wall,
make sure to use the correct wall bracket (plug and screw).
If the controller is placed on a steel plate, make sure that the
plate is at least 2 mm thick.
NOTE: Refer to the paragraph Specifications –
Dimensions to define how to install the M5
screws.
NOTE: Use ONLY the power cable provided with the Focus 61 package. The use of any
other power cable may impair the protection provided by the equipment.
To Next Page
Loading...
