Focus 61 User Guide Table of Contents
7 (118) 9839 0211 01 Edition 2.0
17 TROUBLESHOOTING GUIDE ...................................................................................... 111
18 APPENDIX A – ATLAS OPEN PROTOCOL (AOP) ...................................................... 114
19 APPENDIX B – ERROR CODE AOP ............................................................................ 116
Acronyms and abbreviation
Mechatronic wrench (this name is applicable to all the model listed
in the document)
Mechatronic wrench – signal: the wrench detects the click at the
target torque.
Mechatronic wrench – torque: only torque can be measured.
Mechatronic wrench – torque and angle: both torque and angle can
be measured.
Parameters setting of the tightening.
Assembly of: Focus 61, MWR, cradle and PC with installed
ToolsTalk BLM.
To Next Page
Loading...
