Settings Focus 61 User Guide
9839 0211 01 Edition 2.0 98 (118)
12.2.3 Barcode Scanner Settings
Select both the Baud Rate and internal
Power Supply from the drop-down list
box.
Click respectively Set Baud Rate and Set
Power Supply to confirm.
12.2.4 Display Settings
Set both the Brightness and Contrast on the Focus 61 from
the related section placed in the Display Settings box and
click respectively Brightness and Contrast to confirm.
In case that the radio frequency of a MWR is
unknown, the wrench can be found anyway by
using the search wrenches functionality.
NOTE: The search wrenches functionality is
only accessible as Super User.
To search wrenches, do the following:
1. In the Wrench search section, select the filter to apply. The available options are: All countries,
Europe, USA, Republic of Korea, and Japan. Multi-selection is enabled.
2. In the Wrench search section, click Scan frequencies.
3. When Focus 61 Controller finds a MWR, the Wrench Searching Progress dialog box shows the
corresponding serial number and radio channel of the wrench.
At the end of the search process, the Wrench Search Results dialog box shows all wrenches found.
Click Done.
To Next Page
Loading...
