Focus 61 User Guide Working with ToolsNet
107 (118) 9839 0211 01 Edition 2.0
14 WORKING WITH ToolsNet
ToolsNet is an Atlas Copco application to collect tightening data
via Network, in order to provide traceability on a centralized place
(Database).
To enable ToolsNet, do the following:
1. In the Device Files area, browse Connections. Then click
Toolsnet.
2. In the ToolsNet Configuration dialog box, configure the
ToolsNet settings.
NOTE: Ethernet Interface drop-down list box
has two options:
• None
It disables the communication.
• ETH_A
Interface to use to communicate with
ToolsNet.
To Next Page
Loading...
