Atlas Copco FOCUS 61

User interfaces Focus 61 User Guide
9839 0211 01 Edition 2.0 22 (118)
4.4 Ethernet Ports
The Ethernet Port allows the communication between the Focus 61 and ToolsTalk BLM. In addition,
this port can be used to receive tightening results via simple TCP/IP data output (Focus 61) or to operate
an advanced protocol (e.g. Atlas Open Protocol).
The Focus 61 has two Ethernet ports.
The network interface 1.2:
• Connection to ToolsTalk BLM
• Connection to ToolsNet Server
• Simple result output (port 10001)
• Configuration port (port 9999)
The Network interface 2.1:
• Connection to ToolsTalk BLM
• Atlas Open Protocol ports 4545 and 4546)
• Configuration port (port 9999)