EasyManua.ls Logo

Atlas Copco QAC 1100 Sd - Frame and Information Labels; Generator Frame Description; Generator Information Label Meanings

Atlas Copco QAC 1100 Sd
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 18 -
Information labels
A short description follows of all the generator
information labels.
This symbol means that there is danger
of electric shock.The internal parts
marked with these symbols can only
be opened by qualified personnel.
This indicates that the gas leaving the
engine exhaust pipe is hot and harmful,
and it is toxic when inhaled. The unit
shall always run outdoors or in a well
ventilated room
This indicates that these parts may reach
very high temperatures while running
(for example, engine, exhaust outlet,
etc. Before touching this parts, always
check the temperature.
Indicates that the guides cannot be used
to lift the generator. Always use for
lifting the eye on the upper cover of
the generator.
Indicates the lifting point of the generator.
Indicates that the generator can only
be refueled with this fuel..
Frame
The alternator, the engine, the cooling system,
etc. are contained into a soundproof frame that
may be open through lateral doors (and service
covers).
Indicates the engine oil drain hole.
Indicates the coolant fluid drain hole.
Indicates the fuel drain plug.
Mineral oil for Atlas Copco engine.
Indicates the different ground connections
of the generator.
Indicates that the alternator shall not
be cleaned with high-pressure water.
Indicates that the unit can
automatically start and that the
instruction manual shall bereferred
prior to use.
Read the instruction manual before
using the lifting eye.
Indicates the references of the
different maintenance kits and the
engine oil. These parts may be
ordered from the factory.
Lifting by helicopter is not allowed.

Related product manuals