- 40 -
PAROIL has an excellent TBN retention and higher
alkalinity to control acid formation.
PAROIL prevents soot formation.
PAROIL is optimized for the last generation of
low-emission engines as per EURO -3 & -2, EPA
TIER II & III, using diesel oil with low sulphur
content for lower oil and fuel consumption.
PAROIL E is mineral-based oil for high
performance diesel engines with high viscosity
coefficient. Atlas Copco PAROIL E 500 Ultra was
designed to provide a high level of performance
and protection under standard environmental
conditions from -15°C (5°F).
Checking engine oil level
Refer to the engine instruction manual to obtain
information on the oil specifications, viscosity
recommendations and oil change intervals.
To obtain information on oil change intervals, refer
to section "Maintenance chart" at page 37.
Check engine oil level according to the instructions
in the engine instruction manual, and add oil if
necessary.
Changing oil filter and engine oil
Refer to section "Maintenance chart" at page 37.
gallon
4 1615 5953 00
gallon
20 1615 5954 00
barrel
200 1615 5955 00
PAROIL E Liters Ordering number
gallon
4 1028 8735 00
gallon
20 1028 8735 01
barrel
200 1028 8735 02
Liters Ordering number
PAROIL E 500
ULTRA
(Only Brazil Market)
To Next Page
Loading...
