- 22 -
Setting up the Qc4002™ MkII
Functions of pushbuttons and indicator lights
The Qc4002™ MkII has the below listed
pushbuttons
1 INFO: Changes the screen 3 lines
below and displays the alarm list.
2 JUMP: Introduces the selection of a
specific menu number. All the definitions
are associated to a specific number.
The JUMP button allows the user the
selection and display of any definition
without having to scroll all the menus.
3 ON: Starts the generator set if the
mode SEMI-AUTO orMANUAL is
selected'
4 STOP: Stops the generator set if the
mode SEMI-AUTO orMANUAL is
selected.
5 GB: Manual activation of the
closing and opening sequence
of the circuit breaker if the
SEMI-AUTO mode is selected.
6 MB: Manual activation of the
closing and opening sequence
of the circuit breaker if the
SEMI-AUTO mode is selected.
7 VIEW: Changes the display of the first
line in the setup menus.
8 LOG: Displays the LOG SETUP
window where you can select between
Events, Alarms and Battery records.
When the auxiliary current is
disconnected, records are not cleared.
9 GO BACK: Goes one step back in
the menu (to the previous screen or
to the intake window).
10 MODE: Changes the menu line (line
4) on the screen for mode selection.
11 SEL: It is used to select the highlighted
entry in the fourth line of the screen.
12 UP: Increases the selected set
value (in the setup menu). In the
daily use screen, this button
function is used to scroll the
viewing lines in V1 or to display
the second line (in the setup
menu) of the generator values.
13 DOWN: Decreases the value of
the selected definition (in the
setup menu).In the daily use
screen, this button function is used
to scroll the viewing lines in V1
or to display the second line (in
the setup menu) of the generator
values.
14 LEFT: Moves the cursor to the left
to handle the menus.
15 RIGHT: Moves the cursor to the
right to handle the menus.
To Next Page
Loading...
