- 7 -
Note:After changing the working voltages, the Qc module protection configurations shall be changed.
QC without
program
PARAMETER FACTORY 220 380 440
Genset Mode Island Island Island Island
MF volt delay 5.0 5.0 5.0 5.0
M volt delay60606060
MF low volt 92 92 92 92
MF high volt 108 108 108 108
MF freq delay 5.0 5.0 5.0 5.0
M freq delay60606060
MF low freq 97 97 97 97
MF high freq 103 103 103 103
Engine I. Comm Scania SEM S6 Scania SEM S6 Scania SEM S6 Scania SEM S6
Language Portuguese Portuguese Portuguese Portuguese
Unit C/bar C/bar C/bar 5 seg
Diagnostics off off off off
St. 1 Reset NoNoNoNo
St. 2 Reset NoNoNoNo
DPF Auto Auto Auto Auto
Running Time 0 0 0 0
Horn Delay 20.0 20.0 20.0 20.0
WORKING VOLTAGE
To Next Page
Loading...
