Atlas Copco XAMS 407 CD - AUDIT PROCEDURE OF BRAKE CABLE ADJUSTMENT

- 64 -
AUDIT PROCEDURE OF BRAKE CABLE ADJUSTMENT
Hand brake (adjustable towbar)
1. Check if the towing eye rod of the overrun brake
mechanism is in the outmost position.
2. Hand brake lever is just over its top.
3. Push the compressor a few centimeters
backwards, so that the brake lever is automatically
pulled further up.
4. The cylinder must be in the position of the
dimension on the picture.
Hand brake (fixed towbar)
240
+5
0
105
+5
0
X-Y=35
+5
0
X
Y