Need help?Do you have a question about the Atlas Copco XAMS 850 CD7 and is the answer not in the manual?
General| Model | XAMS 850 CD7 |
|---|---|
| Working Pressure | 7 bar |
| Noise Level | 76 dB(A) |
| Power Supply | Diesel |
| Free Air Delivery | 850 cfm (24.1 m³/min) |
| Weight | 5500 kg |
| Motor Power | 74 kW |
Outlines general safety rules for operating and maintaining the compressor.
Details safety measures for moving and setting up the compressor.
Covers essential safety guidelines for operating the compressor.
Specifies safety protocols for maintenance and repair work on the unit.
Provides an overview of the compressor's main components and systems.
Comprehensive guide for safely parking, towing, and lifting the compressor.
Provides guidance on safely towing the compressor unit.
Outlines the correct and safe procedure for lifting the compressor.
Pre-operation checks and procedures before starting the compressor.
Details the Xc2002™ control module and its capabilities.
Details how to handle and acknowledge alarms on the Xc2002™ module.
Steps for powering the unit on/off and initiating startup.
Instructions for normal stopping and emergency shutdown procedures.
How to check the compressor oil level using the gauge.
Instructions for changing engine oil and its filter.
Procedure for changing compressor oil and its filter.
Details on PARCOOL EG coolant, its properties, and order numbers.
Methods for checking coolant quality, pH, and concentration.
Troubleshooting guide for issues with compressor capacity or pressure.
Troubleshooting for high receiver pressure and unit shutdown faults.
Troubleshooting for overheating and safety guidelines for the alternator.
Lists recommended torque values for assembly and critical components.
Specifies reference conditions and operational limitations for the units.
To Next Page