- 31 -
BATTERY SWITCH
The compressor is equipped with a battery switch.
When the compressor is not in use this switch must
always be in the “OFF” position.
Always first shut off the control unit and wait until the
display is dark before switching the battery switch to
position “OFF”.
To switch the electric system “ON”, turn the handle
(1) of the battery switch clockwise.
To switch the electric system “OFF”, turn the handle
(1) of the battery switch counterclockwise.
It is not allowed to use this switch as an
emergency switch or for stopping the
compressor. It will cause damage in the
control unit when using this switch for
stopping.
Please be aware that when the electric
system is switched “OFF” the batteries
are still under tension.
To Next Page
Loading...
