- 33 -
Following LED´s are used on the Xc2002™ XC2002™ MENU OVERVIEW
At Xc2002™, the LCD will show the following
information through the display views:
1. in Normal condition (scroll through the
information using UP and DOWN):
- Controller type & version
This view shows the controller type and the
software version number.
- Fuel level
This view shows the fuel level (in %) and the
running hours.
- Oil pressure
This view shows the engine oil pressure and the
running hours.
See also "Parameter list" on page 34 for selection
between metric (bar) or imperial (psi) units.
- Coolant temperature
This view shows the engine coolant temperature
and the running hours.
See also "Parameter list" on page 34 for selection
between metric (°C) or imperial (°F) units.
- Engine RPM
This view shows the engine running speed (in
RPM) and the running hours.
Reference Name
1 Power:
Power OK indicator.
2 Alarm:
Flashing: Active, non-acknowledged
alarm(s) present.
Steady: Active, acknowledged
alarm(s) present.
3 Auto/Remote:
Indicates if unit is in Auto or Remote
mode.
4 Load:
Indicates if the compressor is loaded.
5 Run:
Indicates if running feedback is
present.
To Next Page
Loading...
