- 36 -
STARTING / STOPPING
Safety precautions
Make sure the fuel tank is filled up when
“INTERNAL FUEL” is selected.
CONTROL PANEL
Do not disconnect power supply to
control box in any way when the control
box is switched on. This will cause
memory loss.
Do not switch off the circuit breaker
when the control box is switched on. This
will cause memory loss.
When the compressor is put in operation
for the first time and after running out of
fuel or changing the fuel filter, follow the
specific start procedure as described in
section Specific start procedure.
(1)
(2)
(3)
(4)
(5)
(F1)
(F2)
(6)
(O)
(I)
(ON/OFF)
Reference Name
1 Emergency stop
2 Display (4 rows, 40 characters / row)
3 Pressure gauge
4 Arrow Up button
5 Arrow Down button
6 Fuel level gauge
F1 F1 Function button
F2 F2 Function button
O Stop button
I Start button
ON/OFF Power ON/OFF switch
To Next Page
Loading...
