Atlas Copco XRHS 506 Cd - Options

- 45 -
The characters XXXX XXXX in the upper right
corner stand for compressor type.
 COMPRESSOR TYPE
 CONTROL MODE
 BATTERY VOLTAGE
 AMBIENT TEMPERATURE
 SOFTWARE VERSION
 COMPR. SERIAL NR
 ENGINE SERIAL NR
 FLEET NR (Optional)
The “F2” button returns to “READY TO START”.
OPTIONS
The operator can select following settings:
 Language
 Pressure Units (Metric / Imperial)
 Temperature Units (Kelvin / °C / °F)
 Flow Units (Metric / Imperial)
 Service (confirming service taks)
 Horn at start (enable / disable Horn during Start
Warning Time)
 Tests (activating certain tests)
 History (viewing shutdown history)
 Electric refuel pump
 Remote start
 Aftercooler and bypass
 Regulating system dual pressure no fuel expert
 Regulating system dual pressure fuel expert
The “F1” button enters a menu, or confirms a new
parameter setting.
To select a menu, the button function text is
“F1:SELECT”.
To go back, the button function text is “F2:BACK”.
If the “F1” button is pressed, the topic next to ">" is
selected.
For example, if the operator wishes to change the
language to "NEDERLANDS", he would press the
“F1” button when "LANGUAGE" is next to ">".
From there the operator has entered the language
menu. The present value is displayed under
“LANGUAGE”.
Then he scrolls to "NEDERLANDS" and presses the
“F1” button.
The display will show: