- 46 -
ELECTRIC REFUEL PUMP (OPTION)
The fuel pump can be activated in the options status.
When “FUEL PUMP” is selected a second menu
allows the user to activate (“ON”) or deactivate
(“OFF”) the fuel pump.
When switched on the electric refuel pump will
automatically be switched off when:
the tank is full,
the tank from which is being refueled is empty,
when leaving the “FUEL PUMP” menu by
selecting “EXIT” or pressing “F2:BACK”.
SERVICE TASK CONFIRMED
The following confirmation is displayed for 10
seconds, or until the “F1” button is pressed.
When the display shows the Option status again the
service task that has been confirmed is no longer
displayed (because it is confirmed).
SERVICE IN ADVANCE
When “SERVICE IN ADVANCE” is selected the
user enters a submenu.
If the next standard service task is due within 50
running hours, the user can choose “NEXT SERVICE
TASK”.
Next to the next standard service task all active
custom service tasks are always displayed.
When a service task is selected (pressing the button
“F1”), this service task is triggered and confirmed.
This confirmation is also displayed.
When pressing the button “F2”, “EXIT”, the user
goes straight to “READY TO START”.
The electric fuel pump may only be used
when the compressor is not running.
To Next Page
Loading...
