- 44 -
EMERGENCY STOP
When an emergency stop button (1) is pressed, power
to all outputs is terminated, by the emergency stop
itself (hardware) as well as by the software.
The display will show:
When the emergency stop button (1) is unlocked the
operator can reset the emergency stop by pressing the
button “F1”.
INFO
In the Info status, the user gets information about the
Compressor configuration and starting environment:
Following topics are displayed in the Options status
as an endless list. (scrolling down at the last topic
displays the first, scrolling up at the first topic
displays the last).
Text in capitals is the text that appears on the display.
(max 19 characters).
The emergency stop button is only to be used in emergency situations; not for stopping
procedures.
To Next Page
Loading...
