Atlas Copco XRVS 1050 CD4 C3 WUX User Manual

- 63 -
Notes
Maintenance schedule (hrs)
(continuation of page 62)
Daily 50 hrs
after initial
start-up
Every
250 hrs
Every
500 hrs
Every
750 hrs
Every
1000 hrs
Every
2000 hrs
Yea rly
Clean fuel cooler xxx
Clean crankcase breather filter and check for obstructions x x x
Replace air filter element (1) xxx
Check external fuel connection (option) xxx
Inspection by Atlas Copco service technician xxx
Inspect alternator xx
Check/Replace safety cartridge x
(to be continued on page 64)
1. More frequently when operating in a dusty environment.
2. Refer to engine operaton manual.
3. After a day’s work.
4. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
5. Use Atlas Copco oil filters, with by-pass valve as specified in the parts list.
6. Gummed or clogged filters means fuel starvation and reduced engine performance.
7. See section Oil specifications.
8. The following part numbers can be ordered from Atlas Copco to check on inhibitors and freezing
points:
 2913 0028 00 : refractometer
 2913 0029 00 : pH meter.
9. See section Safety valve.
10. See section Before starting.
11. Replace all rubber flexibles every 6 years.
For other specific engine and alternator requirements refer to specific manuals.
12. 250 hours is only valid when using PAROIL E or PAROIL E xtra.
Keep the bolts of the housing, the lifting
beam, tow bar and axles securely
tightened. For torque values see section
Technical specifications.

Atlas Copco XRVS 1050 CD4 C3 WUX Specifications

General

Brand	Atlas Copco
Model	XRVS 1050 CD4 C3 WUX
Category	Air Compressor
Language	English