Atlas Copco XRVS 1050 CD4 C3 WUX User Manual

- 64 -
Maintenance schedule (km)
(continuation of page 63)
N/A Daily 50 km
after initial
start-up
Every
500 km
Every
1000 km
Every
2000 km
Ye ar ly
Check tyre pressure xxxxx
Check torque of wheel nuts x x x
Check coupling head x x x
Check height of adjusting facility x x x x x
Grease coupling head, tow bar bearings at the housing of the
overrun brake
xxx
Check brake system (if installed) and adjust if necessary x x x
Oil or grease brake lever and moving parts such as bolts and joints x x x
Check/Adjust lateral play of wheel bearing x x x
Check tyres for uneven wear xx
Grease sliding points on height adjusting parts xx
Check safety cable for damage xx
Check Bowden cable on height adjustable connection device for
damage
xx
Lubricate torsion bar axle trailing arm xx
Check hub cap for firm seating xx
Change wheel hub bearing grease x
Check brake lining wear x

Atlas Copco XRVS 1050 CD4 C3 WUX Specifications

General

Brand	Atlas Copco
Model	XRVS 1050 CD4 C3 WUX
Category	Air Compressor
Language	English