Period Running
hours
Service
plan
Operation
-- -- -- Check operation of condensate drain
-- 4000 A Replace air filter and oil filter element. Replace breather.
-- 8000 B See Service plan A + small maintenance inlet valve + replace oil
-- 12000 A See Service plan A
-- 16000 C See Service plan B + overhaul check valve + inlet valve and
electronic drains (EWD)
-- 40000 D See Service plan C + overhaul oil pump, replace HP and LP
element
Important
• Always use genuine spare parts. For most preventive maintenance activities,
specific service kits are available. Consult your Spare Parts List for part numbers.
• Always consult your Customer Centre if a timer setting has to be changed.
• Replace damaged or heavily contaminated compressor elements.
• See section Modifying protection settings before modifying the temperature
protection settings.
• Any leakage should be attended to immediately. Damaged flexibles or flexible
joints must be replaced.
6.3 Service kits
Service kits
For overhauling and for preventive maintenance, a wide range of service kits is available. Service
kits comprise all parts required for servicing the component and offer the benefits of genuine
Atlas Copco parts while keeping the maintenance budget low.
Also a full range of extensively tested lubricants, suitable for your specific needs, is available to
keep the compressor in excellent condition.
Consult the Spare Parts List for part numbers.
6.4 Service agreements
Atlas Copco Customer Centres have a range of service agreements to suit your needs:
• An Inspection plan.
• A Preventive maintenance plan.
• A Total responsibility plan.
Contact your Customer Centre to agree on a tailor-made service agreement. It will ensure
optimum operational efficiency, minimize downtime and reduce the total life cycle costs.
Instruction book
API797429 61
To Next Page
Loading...
