CW KEYING: Manual send-receive.Semi-break-in
with CW accessory installed in AC power supply
console.
TRANSMIT CONTROL: Press to talk with Mic.
button, or manual transmit with Function Switch on
front panel. Automatic voice control when VOX
accessory is installed in AC power supply console.
MICROPHONE: Dynamic or crystal.
Plug requirement: standard % in. diam. 3 circuit
phone plug.
AUDIO FIDELITY: 300 to 3000 Hertz, plus or minus
3 db.
METER: Reads power amplifier collector current, 0-
16 amperes.
LINEAR AMPLIFIER CONTROL:
Rear jack provides for keying of linear, and ALC
control from linear.
MODEL 220-CS POWER SUPPLY
CONSOLE SPECIFICATIONS
INPUT VOLTAGE: 110 or 220 volts AC, 50-60 Hz.
INPUT POWER: 10 watts average, receive. 250
watts transmit peak.
OUTPUT: Low current line: 13.6 volts regulated, Vi
amp. High current line: 13 volts at 16 amps.
SPEAKER: 3x5 in. oval, 1.1 oz. magnet, 3.2 ohm
voice coil.
FINISH: Textured Vinyl bonded to aluminum,
durable and scratch resistant.
PLUG-IN DESIGN: Transceiver plugs directly into
power supply console, automatically makes
connections for antenna and front facing speaker.
Mic. jack and headphone jack are brought out to front
panel.
ACCESSORIES: Space under transceiver permits
addition of VOX unit. Space in rear permits addition
of semi-break-in CW.
DIMENSIONS: 15-1/2 in. (39.4 cm) wide. 5-5/8 in.
(14.3 cm) high. 9-1/2 in. (24.1 cm) deep.
WEIGHT: 17 Ibs. (7.7 Kg) less transceiver. 20 Ibs.
(9.1 Kg) shipping weight.
MODEL 200-PS PORTABLE AC SUPPLY
INPUT VOLTAGE: 110 or 220 volts
AC, 50-60 Hertz.
INPUT POWER: 10 watts average, receive. 250 watts
transmit peak.
OUTPUT: Low current line: 13.6 volts regulated, Vi
amp. High current line: 12.5 volts at 16 amps.
INCLUDES: On-Off switch, Fuses, AC cord, and
D.C. Cable with connector for transceiver.
DIMENSION: 5-1/4 in. (13.3 cm) wide, 3-1/2 in. (8.9
cm) high, 6-1/2 in. (16.5 cm) deep.
WEIGHT: 7 Ibs. 4 oz. (3.3 Kg) less transceiver. 10
Ibs. (4.5 Kg) shipping weight.
To Next Page
Loading...