Atlas BP12000X User Manual

Steps Of Installation 22
BP12000X
M. Install Lifting Arms And Adjust The Arm Locks
1. Install the lifting arms (See Fig. 25).
2. Lower the carriages down to the lowest position, then use the 8mm allen
wrench to loosen the nut of arm lock (See Fig. 26).
3. Adjust the arm lock as arrow direction (See Fig. 27).
4. Adjust the moon gear and arm lock so they mesh together, then tighten the
bolts on the arm lock. (See Fig. 27).
Fig. 25 Fig. 26
Fig. 27
Snap spring
Use an 8mm
allen wrench
Adjust the Arm lock
Lock the nuts after the moon
gear and arm lock engaged well

Atlas BP12000X Specifications

General

Brand	Atlas
Model	BP12000X
Category	Lifting Systems
Language	English