Installation Requirement 7
BP12000X
Specifi cations Of Concrete (See Fig. 4)
Concrete specifi cations must be adhered to the specifi cation as following.
Failure to do so may result in lift and/or vehicle falling.
1. Concrete must have a minimum thickness of 6 inches. Concrete must be
cured before the installation.
2. Concrete must be in good condition and must be of test strength 3,500psi
minimum.
3. Floors must be level with no cracks.
Fig. 4
Power Supply
The electrical source must be 3Kw minimum. The source cable size must be
2.5mm² and in good condition of contacting with fl oor.
To Next Page
Loading...
Need help?
General
