Need help?Do you have a question about the Atmel AT89C51ED2 and is the answer not in the manual?
General| Brand | Atmel |
|---|---|
| Model | AT89C51ED2 |
| Category | Controller |
| Language | English |
Lists key features of the AT89STK-11 starter kit.
Lists compatible microcontroller devices for the starter kit.
Provides a visual overview and identification of components on the AT89STK-11 board.
Presents the functional block diagram of the AT89STK-11, illustrating I/O usage.
Details the on-board power supply configurations and sources available.
Describes the power input via the JACK PWR connector.
Describes the power input via the external EXT connector.
Explains the reset functionality, including power-on and push-button reset.
Details various board features like LEDs, buttons, ports, and clock connections.
Describes the communication interfaces available on the board (TWI, SPI, RS-232, OCD).
Details the expansion area for prototyping and I/O signals.
Outlines board configuration options via jumpers and solder straps.
Identifies test points for checking microcontroller power supply.
Explains how to enter and use the Manual In-System Programming mode.
Describes the Auto ISP mode for automated programming via serial lines.
Introduces Atmel's FLIP software for programming C51 devices.
Presents Batchisp software for automated ISP operations.
Lists all components used on the AT89STK-11 board.
Lists relevant product datasheets for compatible microcontrollers.
Defines key acronyms used in the document, like FLIP and ISP.
Details changes made between document revisions 7676A and 7676B.
To Next Page
