Atmel ATmega328 User Manual

554
8271D–AVR–05/11
ATmega48A/PA/88A/PA/168A/PA/328/P
35.4 Errata ATmega88PA
The revision letter in this section refers to the revision of the ATmega88PA device.
35.4.1 Rev. F
•
Analog MUX can be turned off when setting ACME bit
1. Analog MUX can be turned off when setting ACME bit
If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in
ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared.
Problem Fix/Workaround
Clear the MUX3 bit before setting the ACME bit.
35.5 Errata ATmega168A
The revision letter in this section refers to the revision of the ATmega168A device.
35.5.1 Rev. E
•
Analog MUX can be turned off when setting ACME bit
1. Analog MUX can be turned off when setting ACME bit
If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in
ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared.
Problem Fix/Workaround
Clear the MUX3 bit before setting the ACME bit.
35.6 Errata ATmega168PA
The revision letter in this section refers to the revision of the ATmega168PA device.
35.6.1 Rev E
•
Analog MUX can be turned off when setting ACME bit
1. Analog MUX can be turned off when setting ACME bit
If the ACME (Analog Comparator Multiplexer Enabled) bit in ADCSRB is set while MUX3 in
ADMUX is '1' (ADMUX[3:0]=1xxx), all MUX'es are turned off until the ACME bit is cleared.
Problem Fix/Workaround
Clear the MUX3 bit before setting the ACME bit.

Atmel ATmega328 Specifications

General

Brand	Atmel
Model	ATmega328
Category	Microcontrollers
Language	English