15
EDITOR PARAMETER SETTINGS CONTINUED...
EQ-PRE TONE
EQ: Simply double click the EQ button to turn the EQ on/off. Greyed out is off,
while red is on.
TYPE: There is a window that displays the currently selected EQ type. Click on this
window and a list of available EQs will be displayed. Click on one to load it.
NONE: Disables the filter even when it is ACTIVE.
GAIN ONLY: Applies only gain (across all frequencies). In this mode, only the LEVEL
parameter has effect.
LOWPASS 1: Applies a first-order low pass filter which passes bass (lows) and rolls
off treble (highs). This filter begins to roll off (cut) high frequencies above the value set
in the FREQUENCY parameter. It passes all low frequencies below the FREQUENCY
parameter at the level set with the LEVEL parameter. This filter is not affected by the
Q control.
HIGHPASS 1: Applies a first-order high pass filter which passes treble (highs) and
rolls off bass (lows). This filter begins to roll off (cut) low frequencies below the
value set in the FREQUENCY parameter. It passes all high frequencies above the
FREQUENCY parameter at the level set with the LEVEL parameter. This filter is not
affected by the Q control.
LOW SHELF 1: Applies a first-order low shelf filter which changes the level of the
bass (lows) and leaves treble (highs) unaffected. This filter boosts (or cuts) low
frequencies below the value set in the FREQUENCY parameter by the amount
set with the LEVEL parameter. It leaves high frequencies above the FREQUENCY
parameter unaffected. This filter is not affected by the Q control.
HIGH SHELF 1: Applies a first-order high shelf filter which changes the level of the
treble (highs) and leaves bass (lows) unaffected. This filter boosts (or cuts) high
frequencies above the value set in the FREQUENCY parameter by the amount
set with the LEVEL parameter. It leaves low frequencies below the FREQUENCY
parameter unaffected. This filter is not affected by the Q control.
LOWPASS 2: Applies a second-order low pass filter which passes bass (lows) and
rolls off treble (highs). This filter begins to roll off (cut) high frequencies above the
value set in the FREQUENCY parameter. It passes all low frequencies below the
FREQUENCY parameter at the level set with the LEVEL parameter. This mode is
similar to LOWPASS 1, but has a faster roll off and it is affected by the Q control.
The Q control affects peaking before rolloff. Increase the Q to increase the peak that
occurs just before rolloff. Reduce the Q to flatten the peak for a smoother rolloff.
HIGHPASS 2: Applies a second-order high pass filter which passes treble (highs)
and rolls off bass (lows). This filter begins to roll off (cut) low frequencies below the
value set in the FREQUENCY parameter. It passes all high frequencies above the
FREQUENCY parameter at the level set with the LEVEL parameter. This mode is
similar to HIGHPASS 1, but has a faster roll off and it is affected by the Q control.
The Q control affects peaking before rolloff. Increase the Q to increase the peak that
occurs just before rolloff. Reduce the Q to flatten the peak for a smoother rolloff.
LOW SHELF 2: Applies a second-order low shelf filter which changes the level
of the bass (lows) and leaves treble (highs) unaffected. This filter boosts (or cuts)
low frequencies below the value set in the FREQUENCY parameter by the amount
set with the LEVEL parameter. It leaves high frequencies above the FREQUENCY
parameter unaffected...
To Next Page
Loading...