Name: ATOMSTACK A10 Pro
Brand: ATOMSTACK
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Instructions for exporting nc and gc format files

1.Import the picture to be engraved or cutted into laserGRBL, after

setting the engraving speed and energy parameters etc., click File, and

select Quick Save

1.laserGRBL software

2.Select sd chuck as the save path, click Save to generate

nc file.

1.Import the picture to be engraved or cutted into

lightburn, after setting the engraving speed and energy

parameters etc., click Save Gcode.

2.lightburn software

2.Select TF chuck as the save path, click Save to generate

gc file.

Other manuals for ATOMSTACK A10 Pro

Questions and Answers:

Need help?

Do you have a question about the ATOMSTACK A10 Pro and is the answer not in the manual?

General

Laser Power	10W
Laser Wavelength	455nm
Connectivity	USB
Engraving Accuracy	0.01mm
Output Voltage	12V
Engraving Area	410mm x 400mm
Material Compatibility	Wood, Plastic, Leather
Control Software	LaserGRBL
Laser Protective Cover	Yes
Input Format	BMP, JPG, PNG, DXF
Power Supply	AC 100-240V, 50/60Hz
Focusing Method	Fixed focus laser, no need to adjust focus before engraving