EasyManua.ls Logo

ATOMSTACK Air Assist User Manual

ATOMSTACK Air Assist
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN: Plug in
DE: Einstecken
FR: Brancher
IT: Inserire la spina
ES: Enchufar
RU: Подключение
EN: Flow regulation switch
DE: Schalter zur Durchussregelung
FR: Commutateur de régulation de débit
IT: Interruttore di regolazione del usso
ES: Interruptor de regulación de caudal
RU: Переключатель регулирования расхода
EN: Connect the air tube
DE: Verbinden Sie den Luftschlauch
FR: Raccorder le tuyau d'air
IT: Collegare il tubo dell'aria
ES: Conectar el tubo de aire
RU: Подсоедините воздушную трубку
EN: Air Assist User Manual / DE: Air Assist Benutzerhandbuch
FR: Manuel de l'utilisateur Air Assist / IT: Manuale d'uso dell'Air Assist
ES: Manual del usuario de Air Assist / RU: Руководство пользователя Air Assist
EN: Do not bend the air tube
DE: Biegen Sie den Luftschlauch nicht
FR: Ne pas plier le tube d'air
IT: Non piegare il tubo dell'aria
ES: No doble el tubo de aire
RU: Не сгибайте воздушную трубку
EN: It is recommended to use 80% power, full power
operation will shoen the seice life
DE: Es wird empfohlen, 80% der Leistung zu verwenden,
da der Betrieb mit voller Leistung die Lebensdauer verkürzt.
FR: Il est recommandé d'utiliser 80 % de la puissance, le fonctionnement
à pleine puissance réduisant la durée de vie de l'appareil.
IT: Si consiglia di utilizzare una potenza dell'80%; il funzionamento
a piena potenza riduce la durata di vita del dispositivo.
ES: Se recomienda utilizar un 80% de potencia, el funcionamiento
a plena potencia acoará la vida útil.
RU: Рекомендуется использовать 80% мощности,
работа на полной мощности сокращает срок службы
OUTPUT DC 12 V
Question and Answer IconNeed help?

Do you have a question about the ATOMSTACK Air Assist and is the answer not in the manual?

ATOMSTACK Air Assist Specifications

General IconGeneral
BrandATOMSTACK
Voltage12V
Air Flow10-30L/min
Power Supply12V DC
Noise Level50dB
TypeAir Pump
CompatibilityATOMSTACK engravers

Summary

Air Assist Setup and Operation

Power Connection

Connect the air assist device to the power source.

Air Tube Connection

Connect the air tube to the air assist system.

Flow Regulation Switch

Description of the flow regulation switch for adjusting air volume.

Power Usage Recommendation

Using 80% power is recommended to prolong device lifespan; full power operation reduces service life.

Air Tube Handling

Instruction not to bend the air tube to ensure proper function and prevent damage.

Auto Switch Air Assist Configuration

Air Assist Activation

Note on turning on the power switch of the air assist.

LightBurn Setup for Air Assist

Configuration steps in LightBurn for the air assist function.

Related product manuals