Need help?Do you have a question about the ATOMSTACK A12 PRO and is the answer not in the manual?
General| Laser Power/Output Power | 12W |
|---|---|
| Engraving Accuracy | 0.01mm |
| Output Voltage | 24V |
| Positioning Accuracy | 0.01mm |
| Operating System Compatibility | Windows, macOS |
| Working/Engraving Area | 400*400mm |
| Supported Materials | Wood, acrylic, leather, plastic |
| Connectivity | USB |
| Software Compatibility | LightBurn, LaserGRBL |
| Laser Wavelength | 455nm |
| Supported File Formats | BMP, JPG, JPEG, PNG, DXF |
| Data Transmission Method | USB |
| Power Supply | AC/DC adapter |
| Input Voltage | AC100-240V, 50/60Hz |
| Cooling System | Fan |
Advises on avoiding false triggers and disabling during density board cutting.
Details enabling the function, its response to fire, and restarting the machine.
Guides on setting up autofocus in Lightburn using macro commands.
Details adding a custom button in LaserGRBL for autofocus functionality.
Describes the prompt for unfinished jobs and continuing engraving after power loss.
To Next Page
