Need help?Do you have a question about the ATOMSTACK Befon A5 Pro Plus and is the answer not in the manual?
General| Laser Type | Diode Laser |
|---|---|
| Laser Power | 40W |
| Engraving Accuracy | 0.01 mm |
| Laser Protective Cover | Yes |
| Power Supply | AC 100-240V, 50/60Hz |
| Engraving Speed | 10000mm/min |
| Minimum Line Width | 0.01 mm |
| Supported Materials | Wood, bamboo, plastic, leather |
| Connectivity | USB |
| Software Compatibility | LaserGRBL, LightBurn |
| Supported File Formats | NC, BMP, JPG, PNG, DXF |
| Data Transmission Method | USB |
| Machine Material | Aluminum alloy |
| Engraving Area | 410 x 400 mm |
| Laser Wavelength | 455±15nm |
| Focusing Method | Fixed focus laser, no need to focus |
Safety precautions for handling the high-power Type 4 laser product to prevent eye and skin damage.
Guidelines to prevent fires during engraving, manage materials, and ensure fire safety equipment is available.
Recommendations and warnings regarding materials suitable and unsuitable for engraving.
Ensuring the engraver is used in a stable position and avoiding pointing the laser at people or objects.
Instructions for safe power connection, emphasizing the use of a ground wire to prevent hazards.
Instructions for downloading, installing, and configuring LaserGRBL software for engraving operations.
Step-by-step guide to connect the Befon A5 PRO+ engraver to the computer and establish software communication.
Guide to adjusting picture parameters, selecting engraving modes, and setting quality for optimal results.
Procedure for accurately adjusting the laser's focal point using the included fixed-focus piece.
Techniques for precisely positioning the laser head and workpiece using software tools for accurate engraving.
How to initiate and halt the engraving or cutting process using the software's start and stop controls.
Instructions for downloading, installing, and setting up the LightBurn engraving software for use.
To Next Page
