Need help?Do you have a question about the ATOMSTACK X20 Pro and is the answer not in the manual?
General| Laser Power | 20W |
|---|---|
| Engraving Area | 400mm x 400mm |
| Laser Type | Diode Laser |
| Control Software | LaserGRBL, LightBurn |
| Laser Wavelength | 450nm |
| Engraving Accuracy | 0.01mm |
| Minimum Line Width | 0.06mm |
| Cooling System | Air Cooling |
| Operating Temperature | 0-40°C |
| Material Compatibility | Wood, Acrylic, Leather |
| Connectivity | USB |
| Input Format | NC, BMP, JPG, PNG, DXF |
| Power Supply | AC 100-240V, 50/60Hz |
| Focus Method | Manual Focus |
Discusses laser safety measures, including protective glasses and avoiding direct exposure.
Covers fire risks from cutting, fumes, and necessary precautions like fire extinguishers.
Lists recommended and not recommended materials for engraving to avoid damage or hazards.
Outlines safe operating procedures, like horizontal positioning and avoiding pointing the laser at objects.
Emphasizes using grounded power adapters to prevent electrical hazards and fires.
Stresses workplace cleanliness and avoiding flammable materials around the equipment.
Explains the main interfaces of the display: boot, file list, and preparation pages.
Details how to set engraving passes and the functions available during the engraving process.
Guides on obtaining and installing the LaserGRBL software and adding custom buttons.
Instructions on how to connect the engraver to the computer using LaserGRBL.
Explains how to adjust picture parameters, engraving mode, and quality.
Provides a step-by-step guide for installing the LightBurn software and connecting the device.
Describes methods for accurately aligning the laser head and the object for engraving.
To Next Page
