ATOMSTACK X7 Pro Series User Manual

ATOMSTACK X7 Pro series L a s e r
En g r a v e r I n s t a llation M a n u a l
Version: V1.0
English
Deutsche
Français
note: (The picture is for reference only, the actual product shall prevail)

ATOMSTACK X7 Pro Series Specifications

General

Engraving Accuracy	0.01mm
Operating Software	LaserGRBL, LightBurn
Engraving Area	400x400mm
Supported File Formats	BMP, JPG, PNG, DXF
Connectivity	USB
Material Compatibility	Wood, bamboo, leather
Cutting Material	Wood, bamboo, leather, acrylic, fabric, paper, etc.
Laser Protective Cover	Yes
Input Format	NC, BMP, JPG, PNG, DXF etc.
Data Transmission Method	USB
Laser Type	Semiconductor laser
Connection	USB
Laser Wavelength	455nm

Summary

Part 1: Security Statement Before Installation

Part 2: User Security Statement

Laser Safety

Guidelines for safe laser operation and eye protection measures.

Fire Safety

Part 4: Installation Steps

Step 1: Frame Assembly

Initial assembly of the laser engraver frame components.

Step 2: Rail Guide Installation

Step 3: Component Attachment

Step 4: Bracket and Block Assembly

Step 5: Eccentric Nut Adjustment

Part 5: Control Box Description

Part 6: Display Operation Instructions

Display Interface Navigation

Engraving Control Functions

Part 8: Software Installation and Use

LaserGRBL Software Setup

Downloading, installing, and customizing LaserGRBL software.

Connecting Engraving Machine

Connecting the laser engraver to the computer via USB and software.

Driver Installation & Update

Installing and updating necessary drivers like CH340 for machine connection.

Engraving Parameter Configuration

Setting engraving parameters like speed, quality, and modes.

Laser Focus Adjustment

Procedure for correctly focusing the laser using the fixed-focus method.

Positioning the Engraving

Steps to accurately position the laser head and material for engraving.

Starting and Terminating Jobs

LightBurn Software Setup