ATOMSTACK X7 Pro Series

Part 6：Instructions for use of the display
LaserGRBL exports nc
format, Lightburn exports
gc format
Insert SD card
Click Cavre to
enter the SD card
file list
Press the power
button to enter the
home page of the
display
Select the file to be
engraved and move
the laser to the position
to be engraved
Laser fixed focus
method: use a fixed
focus lens below the
laser to determine the
focal length
Select the number of
times you want to
engrave/cut, start
engraving/cutting
Click the position
button to determine
the origin of the laser
Finish carving
Click the frame button
to confirm the
engraving range
Click the
button to start carving
During the engraving
process, the engraving
speed and energy can
be adjusted. If there is
an abnormal situation,
you can press the pause
or stop function key