Part 9：Ma i n t e n a nce instruction s a nd w a r n i n g
This product uses a highly integrated design and requires no maintenance. However, if the laser system installed with this
product needs to be repaired or tuned, please:
1. Unplug the power cord on the laser, so that the laser is in a state of power failure;
2. If you need laser assistance for tuning, please:
1. All present personnel wear protective glasses,OD5+ protective glass is needed ;
2. Make sure there are no flammable or explosive materials around;
3. The position and direction of the laser are fixed to ensure that the laser will not accidentally move and shine on
people, animals, flammable, explosive and other dangerous and valuable objects during debugging.
4. Don't look at lasers
5. Do not shine the laser on the mirror object, lest the laser reflection cause accidental injury.
To Next Page
Loading...
