Shenzhen AtomStack Technologies Co., Ltd. support@atomstack3d.com
6.Precautions
1. R3 Rotary Roller must be keep away from the high temperature environment such as fire.
The high temperature environment may cause heat distortion to destroy the device.
2. Non-technical people cannot disassemble your product to prevent the damage.
3. The roller should not be stride intensely, R3 Rotary Roller is the full-metal device but the
motor may be damage when the device is stride over the secured level. Meanwhile, it may
also distroy the profile.
4. Our R3 should keep away from the chemicals, must be cleaned in time if contact with any
chemicals.
5. It is not allowed for splash water get into the roller, otherwise will damage the motor to
cause failure.
6. R3 rotary roller is electromagnetic, should keep away from the strong magnetic field. It may
cause the failure of motor or the roller is not rolling stably.
To Next Page
Loading...
Need help?
General
