ATV aD5 - Changing Instruments; Switching Drum Kits

12
2 Performing
Changing instruments
Here’s an example of you can assign a dierent snare drum instrument to the snare pad.
Switching drum kits
By switching drum kits you can change the instruments of all pads in a single action.
The aD5 comes with various drum kits in its memory.
1 Strike the snare pad.
The instrument assigned to the snare pad
appears in the screen.
2 Press [INST].
The INST ASSIGN screen appears.
3 Use the value knob or [ ][
] to change
the instrument.
Strike the snare pad to hear the sound.
4 Press the [OK] button to conrm the
setting.
If you decide not to change the setting, press
the [CANCEL] button.
You can change the instruments of other
pads in the same way.
1 Press [KIT].
The KIT SELECT screen appears.
2 Use the function buttons to select a kit.
Next page
Select the kit group
• Use [PAGE ] to see the next page.
• Use [GROUP] to change the kit group. If
you select ALL, all drum kits are displayed.
The home screen appears, and the drum kit
is loaded.
* It takes about 5 seconds for a drum kit to be
loaded.