Owner’s Guide 400-108-015-B
6
Configuration switches are on the back
of the faceplate. Factory settings are
inside gray cells.
1
The thermostat buttons are disabled and appears on the screen (see page
2) when the settings are locked.
2
Place at Fan Yes if you have a fan-forced heater (to prevent premature burn-
out of the motor). Leave at No for better temperature regulation if you do not
have a fan-forced heater.
Configuration switches
# Parameter Up Down
1
Settings lock
1
Lock Unlock
2
Fan-forced heater
2
Fan Yes No
3Unit °F
°C
400-108-015-B (Calypso) ENG.fm Page 6 Monday, November 30, 2009 2:01 PM