Remote control
The IMEO1 includes an IR remote controller, which allows the operation of it from a
distance. The operation range of the remote controller is about 6 meters and shall be
operated without any obstacles between the remote control and the sound bar.
Below explanation gives an overview about the possible controls and their explanation.
1
2
5
3
4
1) Power button: Switches the sound bar between ON and STANDBY mode.
2) MUTE button: Toggles the status between Mute music or resume the sound.
3) Source buttons: Selects the audio source between the various operation modes:
AUX / BLUETOOTH / HDMI ARC / OPTICAL / COAXIAL.
4) Playback control buttons:
buttons: allows to increase or decrease the volume level.
buttons: allows to skip to the previous and next tracks (only in Bluetooth mode)
button: Allows to play / pause / resume playback in Bluetooth mode. Press
and hold to activate the pairing function in Bluetooth mode or disconnect the currently
paired Bluetooth device.
5) EQ buttons
Allows to select a preset sound effect. Various presets are available for FLAT, MUSIC
and SPEECH. The optimal flat configuration is selected when the FLAT preset (default
configured), while low frequencies are added when the MUSIC preset is selected and low
frequencies are reduced when selected the SPEECH preset. Select the optimal preset
according to your application requirements.
To Next Page
Loading...
Need help?
General
