Chapter 3
Placement and mounting
The IMEO1 offers possibilities for placement on a leveled surface underneath / in front
of the TV, display or projection surface. An included mounting bracket offers possibilities
for secure wall mounting, above or underneath the TV, display or projection surface.
Table
Standing
To p
Wall Mount
Bottom
Wall Mount
The special mounting bracket consists of a wall support bar and two fixation hooks which
comes default assembled to the sound bar.
ATTENTION
• Installation must be carried out by qualified personnel only.
• Incorrect assembly can result in severe personal injury and property damage (if
you intend to install this product yourself, you must check for installations such
as electrical wiring and plumbing that may be buried inside the wall).
•
It is the installer’s responsibility to verify that the wall will safely support the total
load of the unit and wall brackets.
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
To Next Page
Loading...
