Connecting
The WP523 wall panel should be connected to the LX523 speaker system by means of UTP twisted
pair cable. The 8-pin Euro-Terminal Block on the rear side of the WP523 should be connected to the
RJ45 connector on the rear side of the speaker system. The maximum cable distance between the
input unit and the speaker system can reach up to 500 meter.
To ensure a proper working of the system, all 8 conductors of the twisted pair cable have to be con-
nected according to the table below.
PI Port PINOUT (Audio, +/-12V DC):
Pin 1 White-Orange AUDIO LEFT
Pin 2 Orange AUDIO LEFT
Pin 3 White-Green +12V DC
Pin 4 Blue -12V DC
Pin 5 White-Blue GND
Pin 6 Green GND
Pin 7 White-Brown AUDIO RIGHT
Pin 8 Brown AUDIO RIGHT
To Next Page
Loading...