17
©2023 by AUDEMO-SYSTEMS®, Schatzbogen 62, 81829 München V3
Example image: After setting up a line group
Note: Repeat this process, as described under Point 7.1, until you have grouped all the speaker lines you want.
• Click on “Enabled” so that your group, which you are now dening, becomes active
• Give your group a unique name in “GroupName”. This is important so that you can later assign your
groups accordingly. Example: “All Call” for All speaker lines if they select all
• Select the lines you want.
• When you have made your settings, click on “OK”. These are then adopted by the system.
8. Installing the Controller
Unpacking
Unpack your controller and inspect for any damage that may have occurred during transit.
If damage is found, notify the shipping company immediately. Only you can initiate a claim for shipping
damage, though AUDEMO-SYSTEMS® will be happy to help as needed. If the product arrived, showing signs
of damage, save the shipping carton for the shipper’s inspection.
We also recommend that you save all packing materials for use if you ever need to transport the unit. Never
ship the unit without the factory carton and packing materials.
To Next Page
Loading...