Audemo SYSTEMS Dante DPM-2500A - Programming DPM 2500 x

9
©2023 by AUDEMO-SYSTEMS®, Schatzbogen 62, 81829 München V3
The programming is dierent depending on the internally installed or externally connected modules.
Overview in the Pades2000 Cong Tool
Note: DPM2500 will appear always as DPM-2500B even for DPM-2500A. Serial number will dene the version
5.1) Highlight the serial number under the device displayed
Now you will see the following in the main window:
5.2) Select the device you want to congure in the Cong Tool. In this case click on the TAB DPM-2500.
Example gure: Tree View Tab
Example gure: main window with selected TAB “DPM-2500”
Example gure: Tree view tab with serial number marked
5. Programming DPM 2500x (digital paging module)