Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Lift up the clamps -arrows- and remove and free up the coolant
hoses.
– Disconnect the connector -1- for the Engine Coolant Level
Sensor - G32- .
– Remove the bolt -2- and remove the coolant expansion tank
-3-.
– Lift the clamp -1 and 3-, and remove the coolant hoses.
Vehicle with Dual-Clutch Transmission:
– Lift the clamp -2- and remove the coolant hose.
– Loosen the hose clamp -arrow- on the left coolant pipe and
remove the coolant hose.
Vehicle with Manual Transmission:
– Lift the clamp -1- and remove the coolant hose.
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
28 Rep. Gr.10 - Engine Assembly
To Next Page
Loading...
