Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Enlarge given hole at top and bottom of cast joint, ∅ 9 mm.
– Insert drill gauge in cast joint and centre over holes.
– Drill, 4 x ∅ 9 mm.
Note:
Unfasten bolted joint of longitudinal member if applicable.
5.1.2 Replacement parts
♦ Front longitudinal member
♦ Banjo union with bolts
Audi A8 1994 ➤
Body repairs - Edition 10.1998
40 Rep. Gr.50 - Body - front
To Next Page
Loading...
