Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Weld inner B-pillar to inner side member, welded seam.
– Make cut in and bend up outer B-pillar at top.
Note:
Bend open B-pillar so as to provide access to side welded seam at extruded section.
– Weld inner B-pillar to roof frame cast joint, welded seam.
Caution:
Take care not to damage cast joints.
– Weld inner B-pillar extruded section to panel, welded seam.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
52 Rep. Gr.51 - Body - centre
To Next Page
Loading...
