Audi A8 1994 - Page 9

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
A = A-pillar
B = Inner B-pillar
C = Outer side panel
An aluminium wire mesh is inserted at the bottom to stop the foam
running through.
D = D-pillar
Prior to foam filling, spray the pillar with wax from inside to stop
the surface being damaged during the foam filling process.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
3. Foam-filled cavities 5