Audi A8 2008 - Page 155

Audi la n e a ssist -
----------------
- Sele ct Warning early , adaptive or late => page 152,
fig . 170 .
S e t t ing th e st e ering wh ee l vibration
- Pressthe(CAR]function button.
- Selec t
Systems in t he CAR menu .
- Selec t
Audi lane assist .
- Selec t Steering vibration weak, medium or strong.
Se tting th e wa rning tim e
Early:
This setting warns the driver before a wheel touches the
detected lane boundary line. The warning depends on the vehicle's
angle as it approaches the boundary line . If you approach a
boundary line gradua lly, the warning will occur ear lier. If you
approach the boundary line at a very sharp angle, the warning wi ll
occur just before a whee l touches the line.
Adapti ve: In this setting, the warning time adjusts to the character -
istics of the road and the vehic le speed. The warning occurs later for
curves and occurs ear lier for straight stretches of road . The warning
occurs later on narrow roads than on wide roads.
Late: This setting warns the driver when a whee l drives over the
detected lane boundary line.
Setting th e steering wheel vibrati o n
When adjusting the steering whee l vibration, the steering wheel
vibrates so that you can check the intensity you have set.
[ i ] Tips
• When making the adjustment, lane assist is not activated . The
steering whee l vibrates briefly only to assist you in changing the
setting .
• Your settings are automatically stored and assigned to the
remote contro l key being used. •
Controls and equip-
ment