Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Fitting location of sender 1 for secondary air pressure -G609-
♦ At rear of engine
Removing and installing ⇒ Rep. gr. 26
Fitting location of solenoid valves for electrohydraulic engine
mounting
♦ At engine mountings:
3 - Electrical connector for left electrohydraulic engine mounting
solenoid valve -N144-
Right-side: right electrohydraulic engine mounting solenoid valve
-N145-
Removing and installing ⇒ Rep. gr. 10
Audi A8 2010 ➤
Simos direct petrol injection and ignition system (6-cyl. 3.0 ltr. TFSI 4-valve) - Edition 12.2011
16 Rep. gr.24 - Mixture preparation - injection
To Next Page
Loading...
