Audi Q7 - Displays; Limitations

37
Displays
When ESC is set to "oroad" mode, the following 2 messages are
successively displayed to the driver in the instrument cluster for
about5seconds in each case.
Limitations
The messages are stored in the tab for driver information and
warning lamps and can be retrieved.
1)
Not available in all countries.
637_032 637_033
637_034
The functions of Audipresense are restricted until the following
conditions are met:
• The ESC mode "oroad" is deactivated using the TCS/ESPbutton
E256.
• The ignition is turned o and on again
1)
because ESC is re-
activated when the ignition is turned on.
• ACC is activated as this would lead to the automatic activation
of ESC.
If ESC is switched on again using the TCS/ESPbutton E256, the
adjacent message is displayed in the instrument cluster.
Stability Control
(ESC): oroad.
Warning!
Restricted
stability
Audi pre sense:
currently restricted
Stability Control
(ESC): switched on
1st display 2nd display
< Back
Forwards >
Ξ Contents